At the moment, this Filter Housings are able to manage flows up to 115 m3/h. Providing the great advantage of having a remarkable lower cost respecting other models. Also, the replacement of the cartridges in this kind of Filter Housings in quick and easy.

MAIN CHARACTERISTICS

Construction Materials Integrally made in PVC for all surfaces in contact with water.

Design Pressure Calculated as pressure vessels following ASME VIII code, applying the material's mechanical characteristics. We produce this kind of equipment for a design pressure of 6 Kg/cm2, in exceptional cases, our technical department studies the viability of this equipment for higher pressures.

Foundation Direct laying on the floor.

Connections In the small models, the inlet/outlet piping are made through PVC coupling nuts with a female flat ending for direct gluing to the pipes accesing to them. In the superior models, the connections are made by a loose flange according DIN 2576 PN10.

Cartridge Fixing In order to assure a reliable watertighness in the cartridge fixing, they are placed in the following way:

In the lower part, settled in the false bottom pleat, guided by a guide tube and a circular seat with a perimetral ledge, that remains incrusted in the cartridge.

In the upper part, is made by a special piece, designed by FLUYTEC,S.A. called "tetón", assuring their waterthigness with a plastified spring that press the tetón against the closure plate.